How To Install A Doorbell Kit

Download Article

Download Commodity

At that place are advantages to both wireless and wired doorbell systems. Choose a wireless model for easy installation and a variety of possible chime sounds. Opt for a traditional wired arrangement for a sturdier, more reliable course of doorbell.

1. i

   Find an piece of cake-to-spot location for the doorbell switch. The doorbell switch is the button that is pushed to audio the doorbell. Cull a visible position adjacent to the door for the switch. Visitors should be able to spot information technology hands when they are standing in front of your door.^[1]

   • Placing the doorbell switch effectually eye-level on either side of your door frame is a expert bet.
   • It is best to opt for a weatherproof model of doorbell that will non be damaged by rain or snow.

2. two

   Attach the switch with screws or adhesive. The switches for most models of doorbells come with holes at the back to make installation easy. Measure the switch and holes and use an electric drill to mountain the switch on your door or wall. Alternatively, apply a strong binding glue to the dorsum of the switch and apply it firmly to the desired surface.^[2]

   • Wipe the surface y'all are attaching the switch to with a make clean, clammy material before the installation.

   Advertizing

3. 3

   Choose a central spot to install the chime box. Ideally, the chime box should be mounted somewhere at the eye of your home to ensure that everyone hears it. Choice a room that is relatively equal in distance from all the other rooms in your dwelling. Choose a room that you exercise not usually close the doors to make certain that the sound will carry.

   • For instance, you lot might install the chinkle box in your living room or dining room.
   • Check the range on the chime box to make sure information technology still connects to the doorbell.^[three]

4. 4

   Put batteries in the chime box and mountain it. Most wireless chime boxes volition take D batteries. Open up the unit and put the batteries in as indicated, them close the dorsum panel securely. Choose a spot in your home where you want the sound to come from and attach the box the wall with screws.^[4]

   • Most chime boxes will have mounting holes on the back.

   Advertizing

1. one

   Cut off power from the breaker or fuse box to avoid injury. Make sure that the circuits that supply electricity to the ability sources you are working with are close off earlier starting the installation. Turn off the advisable switches at your breaker panel or fuse box.

   • Test light switches or other outlets in the area to make sure the power is off.

2. two

   Connect doorbell wires to the chimes. Remove the comprehend on the chimes, and run the wires through the guide channel to the correct terminals. Wrap the ends of the wires around the appropriate terminals. Spiral the holding screws into position.^[5]

   • Yous can choose from a variety of door chimes with different dimensions and sound options.
   • Many models of chimes volition include small wiring diagrams printed inside to help with installation.
   • The embrace should pull off the chimes hands without the use of tools.
   • For future reference, label the wires by writing where each i is meant to go (e.g. transformer, doorbell switch) on small pieces of masking record fastened to each i.

3. 3

   Secure the chimes into position. Make sure that yous tin can run the wiring attached to your chimes to your transformer. Hold the new chimes on the spot that you lot want to attach them and utilize the screws provided to attach the device to the wall or ceiling. In one case the chime plate is secured, fit the cover over the device and gently button until it snaps into place.

4. 4

   Adhere the doorbell switch virtually your door. Choose a location for your doorbell switch near your entrance fashion. Drill a hole to run the wires coming out of the back of the switch into the wall, toward the chimes and transformer. Virtually models will have screws included to secure the plate into position.

   • Install the screws with an electric drill, and then slide the encompass over the device until it snaps into position.

5. five

   Attach the wires and then that the transformer is connected to both the chinkle and the doorbell. Carefully wrap the ends of the wires around the transformer terminals. This small metal device will catechumen the AC ability coming from the door switch to a lower voltage power to ability the chimes.Transformers are frequently mounted straight onto an electrical box to keep high voltage wires enclosed.^[6]

6. half-dozen

   Attach the switch and chimes with twist wire connectors. Employ plastic twist wire connectors to easily link wires between the switch and chimes. Bring the ends of both wires together and place the cap onto the ends, twisting until the wires are firmly connected. This direct connection will create the signal between the doorbell button and the chimes, while the transformer will mediate this connection to bring it to a prophylactic voltage.^[7]

7. 7

   Restore ability and test the doorbell. Restore the power through your ability breaker or fuse box. Button the doorbell switch to test the system. If the chimes part properly, the task is complete.

   • If the doorbell does not role, turn off the power once more and test the wire connections.^[8]

   Advertisement

Add New Question

• Question

  How practice I wire up a doorbell?

  

  Jacob Pischer is a Home Comeback Specialist and the Owner of Helpful Badger, a abode repair service in Portland, OR. With over iv years of experience, Jacob specializes in a variety of handyman services including pressure washing, cleaning gutters, repairing drywall, fixing leaky plumbing equipment, and repairing broken doors. Jacob studied at Madison Area Technical College and has a background in real estate investment.

  

  Home Improvement Specialist

  Expert Respond

Inquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Ad

Video

• If you can't drill into the walls of your dwelling to install a wired doorbell, opt for a wireless model.

Advertisement

Things You'll Need

• Doorbell chimes
• Doorbell wire
• A doorbell transformer
• A doorbell switch
• Twist wire connectors

• Electric drill and screws
• Batteries
• Strong adhesive
• A clean, clammy textile

Well-nigh This Article

Article Summary X

To install a wireless doorbell, showtime by choosing an obvious location for your bell so information technology can easily be seen, such as at eye level on either side of your door. Then, adhere the switch to your chosen spot using screws or adhesive. Once you've installed the switch, pick a central bespeak in your dwelling house for the chime box so you can here it from everywhere. For case, y'all could install information technology in the living room or hallway. Subsequently you've chosen a spot, put batteries in the chime box and adhere it to the wall with screws. For tips on how to install a wire doorbell, keep reading!

Did this summary aid you?

Thanks to all authors for creating a page that has been read 192,809 times.

Did this article help you?

Source: https://www.wikihow.com/Install-a-Doorbell

Posted by: lopezsirstion.blogspot.com

Share this post